● Pumping explosive media
● Pumping corrosive media without using sealing gas
● Pumping dust without using sealing gas
● Pumping of fluids
● Operation with impermissible high gas throughput
● Operation with impermissible high fore-vacuum pressure
● Operation with excessively high irradiated heat output
● Operation in impermissible high magnetic fields
● Operation in an incorrect gas mode
● Venting with impermissible high venting rates
● Use for pressure generation
● Use in areas with ionizing radiation
● Operation in explosion-hazard areas
● Use in systems in which sporadic loads and vibrations or periodic forces act on the device
● The causing of hazardous operating conditions by a presetting on the electronic drive unit that is
contrary to the process
● Use of accessories or spare parts that are not listed in these instructions
2.7 Personnel qualification
The work described in this document may only be carried out by persons who have appropriate profes-
sional qualifications and the necessary experience or who have completed the necessary training as
provided by Pfeiffer Vacuum.
Training people
1. Train the technical personnel on the product.
2. Only let personnel to be trained work with and on the product when under the supervision of
trained personnel.
3. Only allow trained technical personnel to work with the product.
4. Before starting work, make sure that the commissioned personnel have read and understood
these operating instructions and all applicable documents, in particular the safety, maintenance
and repair information.
2.7.1 Ensuring personnel qualification
Specialist for mechanical work
Only a trained specialist may carry out mechanical work. Within the meaning of this document, special-
ists are people responsible for construction, mechanical installation, troubleshooting and maintenance
of the product, and who have the following qualifications:
● Qualification in the mechanical field in accordance with nationally applicable regulations
● Knowledge of this documentation
Specialist for electrotechnical work
Only a trained electrician may carry out electrical engineering work. Within the meaning of this docu-
ment, electricians are people responsible for electrical installation, commissioning, troubleshooting, and
maintenance of the product, and who have the following qualifications:
● Qualification in the electrical engineering field in accordance with nationally applicable regulations
● Knowledge of this documentation
In addition, these individuals must be familiar with applicable safety regulations and laws, as well as the
other standards, guidelines, and laws referred to in this documentation. The above individuals must
have an explicitly granted operational authorization to commission, program, configure, mark, and earth
devices, systems, and circuits in accordance with safety technology standards.
Trained individuals
Only adequately trained individuals may carry out all works in other transport, storage, operation and
disposal fields. Such training must ensure that individuals are capable of carrying out the required activi-
ties and work steps safely and properly.
Safety
16/62
Summary of Contents for HiPace 300 P
Page 1: ...OPERATING INSTRUCTIONS EN Translation of the Original HIPACE 300 P Turbopump ...
Page 61: ...61 62 ...
Page 62: ...Notizen Notes ...
Page 63: ......
