Pfeiffer Vacuum HILOBE 1004, Operating Instructions Manual

Page: 4 / 68

6.3.4 Telegram example 2 34
6.3.5 Data types 35
7 Parameter set 36
7.1 General 36
7.2 Control commands 36
7.3 Status requests 37
7.4 Reference value inputs 38
7.5 Additional parameter for the DCU 38
8 Operation 39
8.1 Commissioning the vacuum pump 39
8.2 Switching on the vacuum pump 39
8.3 Configuring the connections with the Pfeiffer Vacuum parameter set 39
8.4 Operating modes 40
8.4.1 Normal operation 41
8.4.2 Stand-by operation 41
8.4.3 Rotation speed setting mode 41
8.5 Operation monitoring 41
8.5.1 Operating mode display via LED 41
8.5.2 Temperature monitoring 42
8.5.3 Check the lubricant level 42
8.6 Switching off and venting 42
9 Maintenance 44
9.1 Maintenance information 44
9.2 Checklist for inspection and maintenance 44
9.3 Cleaning the air filter 46
9.4 Changing the lubricant 46
9.4.1 Draining the lubricant 47
9.4.2 Filling with lubricant 47
10 Decommissioning 49
10.1 Shutting down for longer periods 49
10.2 Recommissioning 49
11 Recycling and disposal 50
11.1 General disposal information 50
11.2 Dispose of HiLobe roots pumps 50
12 Malfunctions 51
12.1 General 51
12.2 Troubleshooting 51
12.3 Error codes 52
12.4 Warning and error messages when operating with DCU 53
13 Service solutions by Pfeiffer Vacuum 54
14 Ordering spare part packages 56
15 Accessories 57
15.1 Accessory information 57
15.2 Order accessories 57
16 Technical data and dimensions 59
16.1 General 59
16.2 Substances in contact with the media 59
16.3 Technical data 60
16.4 Dimensions 62
Declaration of conformity 64
Table of contents
4/66