Pfaff EXPRESSION 2014, Service Manual, Page: 67 / 112

65
●
Fold the baseplate towards the machine.
●
Attach the cable clip.
●
Fasten the baseplate on the housing with the three fastening screws.
●
Attach the face plate.
●
Attach connection plug 2 onto the circuit board of the front housing shell.
●
Install the sewing lamp cable.
●
Mount the facing panel of the front housing panel.
●
Insert the housing insert and fasten with the torx screws.
●
Attach the top cover.
●
The following points must be checked and adjusted:
●
Section 17 "Adjustment of bobbin thread tension"
●
Section 18 "Adjustment of needle thread tension"
●
Section 20 "Adjustment of equal forward and reverse stitch length"
●
An electrical safety test must be carried out in accordance with VDE 0701 using the testing appliance
Metrawatt 5013.