Pfaff Creative Vision Owner'S Manual Download

Page: 140 / 142

We reserve the right to change the machine equipment and the

ass ort ment of accessories without prior notice, or make modi

cations to

the performance or design.
Such modi

cations, however, will always be to the bene

t of the user

and the product.

Please note that on disposal, this product must be safely

recycled in accordance with relevant National legislation

relating to electrical/electronic products. If in doubt please

contact your retailer for guidance.

Intellectual Property

Patents protecting this product are listed on a label positioned

underneath the Sewing Machine.
PFAFF, CREATIVE VISION, CV, IDT (image) and 4D are

trademarks of KSIN Luxembourg II, S.ar.l.

Summary of Contents for Creative Vision














































































































































Search results

Summary of Contents for Creative Vision

Reviews:

Related manuals for Creative Vision

Brands by name

Popular brands

Pfaff Creative Vision, Owner'S Manual

Search results

Summary of Contents for Creative Vision

Reviews:

Related manuals for Creative Vision

Brands by name

Popular brands