Pfaff creative 4874, Instruction Manual, Page: 43 / 144

2-29
Technical section, general
Attach converter
Turn off the power switch
The converter (41) must be attached for all
2-thread seams (except program 04) and
the 2-needle, 3-thread overedge seam.
Open the swivel table and take out the
converter.
Move the upper looper (30) beside and
to the right of the needle by turning the
hand wheel.
Secure the tip of the converter in the
eye of the upper looper and push the
converter onto the upper looper base.
To remove the converter, fi rst release its tip
from the eye of the upper looper. Now you
can pull the converter up and out. Note: The LCD display (9) will
show whether the converter
should be attached (see page
3-2).
41
30