Pfaff creative 4874 Instruction Manual Download Page 11

Page: 11 / 144

1-11

Technnical Part

Summary of stitch programs for the creative 4874

Program 01

Program 10

Program 09

Program 08

Program 07

Program 06

Program 05

Program 04

Program 03

Program 02

Program No.

Description

Use

2-needle cover hem, narrow

For hemming stretch fabrics and piping, for decorative
effects.

2-needle cover hem, wide

For hemming stretch fabrics and for decorative effects.

3-needle cover hem

For hemming highly stretch fabric and for decorative
effects.

Chainstitch

For sewing together extremely durable fabrics such as
upholstery covers and denim, both without overedge.
May also be used for decorative effects.

2-thread ﬂ atlock, narrow

As ﬂ atlock seam for sewing stretchy fabrics together
with decorative effect, or for overedging light fabrics.

2-thread ﬂ atlock, wide

As ﬂ atlock seam for sewing stretchy fabrics together
with decorative effect, or for overedging medium
fabrics.

2-thread serging, narrow

For overedging light fabrics.

2-thread ﬂ at hem

For overedging very ﬁ ne fabrics and as decorative edge
ﬁ nish.

2-thread fold. rolled hem

For overedging very ﬁ ne fabrics and as decorative edge
ﬁ nish.

3-thread overedge seam, narrow For edging light, easily fraying fabrics.

Summary of Contents for creative 4874

















































































































































Search results

Summary of Contents for creative 4874

Reviews:

Pfaff creative 4874, Instruction Manual, Page: 11 / 144

Search results

Summary of Contents for creative 4874

Reviews: