Pfaff creative 4874, Instruction Manual, Page: 35 / 144

2-21
Technical section, general
Needle threader
Turn off at the power switch
Raise the needle(s) to its/their highest
position and lower the presser foot. Place
the thread running from right to left in
notch A of the needle threader (the needle
threader is included in the accessory box).
One of the two triangles must be pointing
upwards.
Place the needle threader against the front
groove of the needle. Move down as far
as the eye of the needle and press the
threader gently against the needle. This
causes a small metal pin to pass through
the eye and the needle is threaded
automatically. Note: If you press too hard, the
small metal pin will bend and
you will no longer be able to
use the threader to thread the
needle.
Now you can use the needle threader to
pull the thread loop through to the rear.
A