Pfaff creative 4874, Instruction Manual, Page: 138 / 144

9-2
Cleaning of the machine
Turn off the power switch
Remove the top cover hook or decorative
thread guides.
Remove the trim catcher, open the front
cover and the swivel table. Disengage the
upper knife. Remove the presser foot and
the needle plate.
With the lint brush provided in the
accessory box, remove lint from the upper
and lower knives, the differential feed and
the looper area.
Oiling the machine
Turn off the power switch
Bring the upper looper to its highest
position by turning the hand wheel. After
every cleaning of the machine, oil the
points shown with the oil included in the
accessories. One or two drops of PFAFF
sewing machine oil are suffi cient. All other
parts are made from special materials and
do not need to be oiled.
Removing the needle plate
Turn off the power switch
Raise the presser foot and bring the
needles to their highest position. Remove
the presser foot and open the swivelling
table. Press the needle plate disconnection
lever (38) downward. The needle plate can
be removed to the left.
Note: Remove the threads
before changing the needle
plate.
Placing the needle plate
Put on the needle plate in the back fi rst
on to the guide pin A and press the needle
plate downward in the front until it snaps
in place.
A
38