Preparation
9 - 2
Fig. 9 - 02
●
Place an empty bobbin
1
onto bobbin shaft
2
.
●
Thread the bobbin in accordance with
Fig. 9-02
and wind it anti-clockwise around bobbin
1
a few times.
●
Switch on the bobbin winder while at the same time pressing bobbin winder spindle
2
and
lever
3
.
The bobbin fills up during sewing.
If the machine is only being used to wind the bobbin (without sewing), a bobbin
case must be inserted in the hook! (Danger of damage to the hook).
●
The tension of the thread on bobbin
1
can be adjusted with knurled screw
4
.
●
The bobbin winder stops automatically when bobbin
1
is full.
If the thread is wound unevenly:
●
Loosen nut
5
.
●
Turn thread guide
6
accordingly.
●
Tighten nut
5
.
6
5
4
9
.02
Winding the bobbin thread, adjusting the thread tension
-
3
2
1
+