Mounting and commisioning the machine
8 - 2
8
.02
Commissioning
●
Examine the machine, in particular the electric cables, for any damage.
●
Before commissioning the machine, clean it thoroughly, also see
Chapter 10 Care and
Maintenance!
●
Connect the machine to the compressed air system. The manometer should display a
pressure of
6 bar.
If necessary, set this value, see
Chapter 10.03 Checking / adjusting
the air pressure.
Have qualified personnel check whether the machine can be operated with the
available voltage and whether it is connected properly. If there are any
irregularities do
not
operate the machine!
The machine may only be connected to an earthed socket!
8
.03
Switching the machine on/off
●
Switch the machine on or off in accordance with
Chapter 7.01 Main switch.
8
.01.02
Mounting the spool holder
●
Mount the spool holder as shown in
Fig. 8-02
.
●
Insert the spool holder into the hole in the
table top and fasten it with the nuts
enclosed.
Fig. 8 - 02