Mounting and commisioning the machine
8 - 1
74-006
8
Mounting and commissioning the machine
The machine must only be mounted and commissioned by qualified personnel!
All relevant safety regulations are to be observed!
8
.01
Mounting
The necessary electricity supply must be available at the machine’s location. Also, a stable
and horizontal surface as well as adequate lighting are required at the location.
Depending on the type of table, the method of packaging used may require that
the table top be lowered for transport. The following is a description of how to
adjust the height of the table top.
8
.01.01
Adjusting the table-top height
●
Loosen screws
1
and set the table height as required.
●
Well tighten screws
1
.
Fig. 8 - 01
1
1