Pfaff 3811-15/65, Instruction Manual, Page: 23 / 138

Set-up and Initial Start-up
23
Fig. 8 - 04

Loosen screws 2 and align the belt guard bracket 1 so that the motor pulley and v-belt
run freely.

Tighten screws 2.

Secure the belt guard 3 with screw 4
1
2
2
4
3
8
.01.04
Mounting the lower V-belt pulley
Fig. 8 - 05
8
.01.05
Fitting the position sensor

Attach the position fi nger 1 with the
screws 2.

Slide the synchroniser 3 onto the shaft
so that the position fi nger 1 is positioned
in the groove of the synchroniser 3 , see
arrow .

Gently tighten the screws 4.

Insert the synchroniser plug on the fe-
male coupling of the control box.

Set synchroniser 3, see Chapter
13.05.01 Home position of the ma-
chine.
1
2
3
4