Pfaff 3811-15/65, Instruction Manual, Page: 19 / 138

Operating Controls
19
7
.07
Keypad
Keypad 1 is used to quickly operate the machine during sewing. Each key can be assigned
an individual fullness value, see Chapter 9.05 Input fullness . By means of the respective
light-emitting diode of the 20 keys, activated key functions are displayed (function activated
= luminous diode).
Fig. 7 - 07
Numeric keys (0 - 15)

The pre-assigned fullness value is retrieved by pressing the key.

The corresponding average value is called by pressing two adjacent numeric keys at the
same time.
In the basic setting of the keypad, the set range is divided into 15 sub-steps
from " 0 " to "max." The basic setting is e.g. after a cold start, see Chapter 13.13
Cold start.
Tape brake (option)

The tape brake is switched on or off by pressing the key.
When the belt brake is engaged, the gathering of the material is enhanced.
Edge trimmer

The edge trimmer device is switched on or off by pushing the key.
Correction value +/correction value -

By pressing the key the value for the multiple width is increased or decreased by 2
steps.
1
9
3
8
7
5
1
6
2
4
0
11 12 13 1
4 15
10
1 1