Pfaff 3734-12, Instruction Manual, Page: 74 / 88

Adjustment
12 - 31
1 101 Start backtack, pedal-controlled
(I = OFF, II = ON)
I
102 Reversing
(I = OFF, II = ON)
I
103 Stitch placement
I = OFF, II = ON)
I
104 Bobbin thread monitoring
( 0 = OFF, I = reverse counter,
2 = thread monitor )
0 - 2 0
105 Bobbin thread reverse counter 0 -99999 12000
106 Remaining bobbin thread counter 0 -999 100
107 Maximum stitch length of 0.8 - 6.5 4.0
fullness pedal (mm)
108 Display software version of
main processor
0329/....
110 Display software version of V004H202
the control panel
111 Display software version of the V35
sewing drive
112 Key tone of the control panel
I = off, II = on
II
113 Horn for section change II
I = off, II = on
2 202 Lowering speed roller presser
I = slow, II = quick
II
203 Puller I = OFF, II = ON I
3 301 Position take-up lever t.d.c 0 – 127 2
302 Position needle lowered 0 - 127 20
303 Position cutting solenoid “on“ 0 - 127 20
304 Position cutting solenoid “tacting“ 0 - 127 103
305 Position cutting solenoid “off“ 0 – 127 123
12
.06.03
List of parameters
The operator has free access to the “100“ parameters. Parameters “200“ –
“800“ can only be changed after entering a code number and many only be
changed by authorised personnel.
Group Parameter Description Setting Set
range value