Adjustment
12 - 14
12
.04.12
Automatic presser foot lift
Requirement
When solenoid
1
is activated, lever
3
should drop automatically to raise the roller presser.
1
2
●
Adjust solenoid
1
( screws
2
) in accordance with the
requirement.
●
Switch on the machine and check the
requirement.
●
Switch off the machine.
Depending on the material thickness, the clearance between roller presser and
feed wheel can be increased up to
10 mm
by moving the solenoid
1
to the
right.
Fig. 12 - 12
87-034
3
Summary of Contents for 3734-12
