Adjustment
12 - 7
87-026
12
.04.05
Height and stroke of the bobbin case opener
Requirement
1. The top edges of the bobbin case opener
1
and bobbin case base
3
should be on one
level.
2. When the bobbin case opener
1
has deflected the bobbin case to its furthest point, the
catch of the bobbin case should be
0.3 – 0.5 mm
from the back edge of the needle
plate recess.
Fig. 12 - 05
●
Adjust bobbin case opener
1
( screw
2
) in accordance with
requirement 1.
●
Turn the balance wheel until the bobbin case opener has deflected the bobbin case to its
furthest point.
●
Adjust bobbin case opener
1
( screw
2
) in accordance with
requirement 2.
Depending on the thread size, a variation of the setting in
Requirement 2
is
permitted.
1
2
87-024
3
1
87-025
0,3 - 0,5 mm
Summary of Contents for 3734-12
