8 - 10
Installation and commissioning
●
Switch the machine on at the main switch and tilt it back.
The error message "E9" must appear on the control panel.
●
If the message does not appear, check the setting of switch
4
.
●
Set the sewing head upright and acknowledge the error message by pressing the
TE/
Speed
key. The machine is ready for operation again.
E
9
ERROR
92-
01
3
8
.10
Mounting/connecting the start inhibitor
(only on machines with
Quick-Anbaumotor)
●
For machines delivered without a table, the plate
1
from the accessories should be
mounted under the table top, so that the switch lug
2
is resting on plate
1
when the
sewing head is in an upright position.
●
Loosen screws
3
and adjust switch
4
so that the switch lug
2
is free when the sewing
head is tilted back and pressed when the sewing head is upright.
●
Connect plugs
5
and
6
to the switch
4
.
Function check of the start inhibitor
Fig. 8 - 09
2
4
3
92-015
1
5
6
Summary of Contents for 3704-2/02
