Making up styling parts
13 - 3
13
.02
Making up guide blades for curved, pointed darts
●
Program dart 7 mm and position work-holder bar.
●
Secure blank for guide blade to guide-blade carrier.
●
Engage guide blade and lower work-holder bar.
●
Transfer contour of work-holder bar to guide blade using a scribe
(Fig. 13-04).
●
Scribe an intersection 5 mm to the right from the cutout in the wrok-holder
bar
(Fig. 13-05).
●
Disengage and remove the guide blade.
●
Scribe a new line parallel and at a distance of 1.5 mm to the scribed contour of the work-
holder bar
(Fig. 13-06).
Fig. 13 - 04
Fig. 13 - 05
work-holder bar
Blank for guide blade
95-752091-16