Sewing
44
O
Select the desired speed (e.g.
2200
) by pressing the
+/- key (B; C)
.
O
Change the value for the stitch length (e.g.
2
.
2
mm) by pressing the
+/- keys (P; S)
.
O
Stitch the fifth seam zone using the pedal functions (e.g.
35
stitches).
O
Call up corner programming. (LED in the key lights up.)
O
Select the desired turn (e.g.
23
mm) by pressing the
+/- keys (D)
.
O
Switch on the "Turn corner" function for the seam zone. The turn is performed.
O
Exit "teach-in mode". (The LED in the key does not light up.)
The machine initiates thread trimming and saves the program.
O
Carry out a test seam and make corrections to the seam construction diagram if neces-
sary, see
chapter 10
.
04
.
02
Changing seam construction diagrams
.
Functions, such as "start backtack/end backtack", "edge trimmer", "thread trim-
mer" etc. can be assigned to the corresponding seam construction diagram by
activating the respective key.
5 22
2.2
35
23