Operating Controls
20
F2
(setting aid for the edge trimmer)
O
The corresponding function is switched on or off by pressing the key.
The edge knife moves to the trimming position in manual sewing when the function is
switched on.
F3
O
After calling up the corresponding "PC" (piece counter) function, the piece counter is
reset by pressing this key, see chapter
10
.
03
.
03
Switching on the edge trimmer
with a
time delay (waistband extension)
Start inhibitor
O
The start inhibitor is switched on or off by pressing the key. The sewing or seam
sequence cannot be started when the function is switched on.