Pfaff 3511-3/01, Instruction Manual, Page: 19 / 70

Operating Controls
19
Alternating sewing
O
Pressing this key will switch between the linked programs.
Stitching / correcting seam programs
O
The "Stitch / correct seam programs" function is switched on by pressing this key. The in-
dividual seam sections of a program can be stitched one after the other and corrected if
necessary by pressing the pedal.
PM / mode
O
If this key is pressed, the programmed sewing function is switched on or off.
The program-specific parameters are shown in the alphanumeric part of the display.
Scroll
O
If this key is pressed, the input menus on the display are scrolled through.
TE
O
If this key is pressed, the machine changes from sewing mode to the parameter entry
function.
O
The "teach-in" mode is called up by pressing this key in the seam construction diagram
function.
O
The changed values are saved and sewing mode is called up by pressing this key from
the parameter entry function.
O
Program management is called up by pressing this key twice, see chapter 11 . 01 Pro-
gram management .
Piece counter
O
The piece counter is switched on or off by pressing the key. The actual value is shown
on the display when the function is switched on
Support reel
O
The support reel function for the corresponding seam zone of the seam construction
diagram is switched on or off by pressing the key in the seam programming function.
The support reel in the corresponding seam zone extends in programmed sewing with
the seam construction diagram.
Corner programming
O
The corresponding function is switched on or off by pressing the key. The corner pro-
gramming for the corresponding seam zone of the seam construction diagram is per-
formed when the function is switched on.
Turning corners
O
The corresponding function is switched on or off by pressing the key. The "Turn corners"
function for the current seam zone is performed according to the distance indicated on
the display when the function is switched on.
F1
(cycle time)
O
The cycle time display (duration of a seam sequence) is switched on or off on the display
by pressing the key.