Adjustment
13 - 30
●
Place one material ply under the sensors.
●
To start the adjustment for one material ply, press
"+"
on the corresp/- key.
●
Move the material ply to and fro under the sensors for a short time.
●
To end the adjustment for one material ply, press
"-"
on the corresp/- key.
●
Place material with two plies under the sensor.
●
To start the adjustment for two material plies, press
"+"
on the corresp/- key.
●
Move the material plies to and fro under the sensors for a short time.
●
To end the adjustment for two material plies, press
"-"
on the corresp/- key.
●
If necessary, increase or reduce the transmitting power with the corresp/- key.
●
Press the
F3
key and sew a test seam.
●
Switch off the machine.
13
.09
Adjustment of the transmitted light sensors
Requirement
The difference between one and several material plies should be recognised.
●
Switch on the machine.
●
Press the
F3
key to select the menu for adjusting the transmitted light sensors.
L -
L -
Tx
Rx
Tx
L -
L =
-96-
Lo
---
===
L =
L =
Summary of Contents for 2483-980/31
