Input
11 - 9
1.5
PM
●
With the corresponding
+/- key
set the value for the seam depth at "1.5".
The actual value for the seam depth is made up of the desired seam depth and
the appropriate positive or negative correction value, when the angle on the ma-
terial is not equal to 90°.
●
Press the
scroll
key to be able to select the next seam section.
Selecting the functions for seam section 6
- The presser foot should be raised at the end of the seam section.
- The machine should stop at the end of the seam section.
- The end of the seam section should be recognised by sensor (0.8 mm seam depth).
●
Press the
programmed stop
key, to stop the machine automatically at the end of the
seam section.
●
Press the
sensor
key for recognition of the end of the seam section by sensor.
7
6
2.0
PM
Selecting seam section 6
●
Select seam section "6" with the corresponding
+/- key.
7
5
2.0
PM
Summary of Contents for 2483-980/31
