Pfaff 2481-980/30 PLUSLINE, Instruction Manual, Page: 56 / 112

Adjustment
13 - 2
13
.04
Control and adjustment aids
The positions required during adjustment can be fixed with the help of
adjustment pin 1 (part no. 13-033 346-05) and, if necessary, adjustment gauge 3
(part no. 61-111 639-73).
Needle bar position 1.8 mm past b.d.c.
●
Turn the balance wheel until the needle bar is approximately in the required position.
●
Insert adjustment pin 1 in the hole.
●
Move the balance wheel fractionally to and fro until adjustment pin 1 engages in crank 2 .
Needle bar position 0.6 mm past b.d.c.
●
Bring the needle bar approximately into the required position.
●
Fit adjustment gauge 3 to pins 4 and 5 , paying attention to the right side (for 30 mm or 36
mm needle bar stroke).
Fig. 13 - 01
1
2
4
5
57-15a
3