Pfaff 2481-980/30 PLUSLINE, Instruction Manual, Page: 39 / 112

Sewing
10 - 2
Number of stitches for the start and end backtacks
With the use of this input area the number of stitches for the start and end backtacks are
entered, see Chapter 9.08 Entering the start and end backtacks.
Start backtacks
Switches the start backtack function on or off.
End backtacks
Switches the end backtack function on or off.
Needle position raised
When this function is activated, the needle is positioned at t.d.c. after sewing stops.
Presser foot raised
When this function is activated, the presser foot is raised after sewing stops.
Seam end with pedal
When this function is activated, the seam end is initialised manually with the pedal.
Seam end with sensor / compensating stitches
Opens the menu for entering the compensating stitches, see Chapter 9.09 Entering the
number of compensating stitches.
When this function is switched on, the seam end is initialised automatically with the edge
sensor.
Presser foot raised after thread trimming
When this function is activated, the presser foot is raised after thread trimming.
Thread trimming
When the function is activated, thread trimming with the pedal function is possible.
Bartack suppression
When operated, the next bartack is suppressed.
Input mode
Calls up the input mode.
If the bobbin thread monitoring function is switched on, the remaining number of
stitches is also displayed, and if the speed display function is switched on, the
current speed is also displayed, see Chapter 13.11.03 List of parameters.
●
Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal.