Input
39
6
.02.02
Example of a seam program input using the "teach-in" function
The program to be created should
- have
3
seam sections and
- be stored under the program number "
11
" with the comment "TEACH".
Switch on the machine.
●
Call up the input mode.
●
Call up the "teach-in" function and enter program number "
●
11
".
Set the seam type (right seam) by pressing until the appropriate symbol appears.
●
Call up the menu for comment input.
●
Enter the comment "TEACH" with the keyboard and number panel.
●
Conclude the comment input.
●
Change to the input of the fi rst seam section.
●
Seam area 1
Learn number of stitches
Fullness: 0
Seam area 2
End with knee switch
Fullness: 30
Seam area 3
Without stitch count
End with pedal position "-2"
Fullness: 0