Input
29
6
.01.02
Seam program input with the "Creating/adjusting a program" functionen"
With this function the seam program is entered by entering or changing the appropriate va-
lues on the control panel. This type of seam program input is particularly suitable for adjus-
ting existing seam programs.
Switch on the machine.
●
Call up the input mode.
●
Call up the "creating/adjusting a program" function.
●
Carry out the basic settings and conclude with the "Enter" function, see Chapter
●
6
.
01
.
01
Basic settings for seam program input.
Alter the fullness, see Chapter
●
4
.
02
Inputting fullness.
Alter the maximum speed for the current seam section.
●
These functions are used to scroll through the current seam program.
●
The current seam section is displayed accordingly, in addition to all the other current
values.
Enter the seam start functions, see Chapter
●
6
.
01
.
04
Entering the functions at the be-
ginning of the seam during seam programming.
Enter the functions for the end of the seam section, see Chapter
●
6
.
01
.
05
Entering the
end of the seam section when programming the seam.
Select a seam type
●
It is only possible to select the right or left seam, if the seam type "right and left seam"
was selected in the basic setting, see Chapter
6
.
01
.
01
Basic settings for seam program
input.