10/ 2004
BENNING MM 6
10
Operating Manual
BENNING MM 6
Digital Multimeter for
- DC voltage measurement
- AC voltage measurement
- DC current measurement
- AC current measurement
- Resistance measurement
- Diode testing
- Continuity testing
- Capacity measurement
- Frequency measurement
Contents
1. Operating instructions
2. Safety notes
3. Contents of delivery
4. Description of unit
5. General data
6. Ambient conditions
7. Electrical data
8. Measuring with the BENNING MM 6
9. Maintenance
10. How to use the protective rubber holster
1. Operating instructions
This operating manual is intended for:
- electricians and
- qualified electrotechnical persons.
The BENNING MM 6 is designed for measurements in dry surroundings.It must
not be used in electrical circuits with rated voltages higher than 1000 V DC and
750 V AC (for more details, see section 6 “Ambient conditions”).
The following symbols are used in the Operating Manual and on the
BENNING MM 6 itself:
This symbol indicates an electrical hazard.
This symbol indicates sources of danger when using the
BENNING MM 6 (see documentation).
This symbol on the BENNING MM 6 indicates that the unit is
protection insulated (safety class II).
This symbol on the BENNING MM 6 indicates the fuses which it
contains.
This symbol appears in the display for a discharged battery.
This symbol indicates the “diode-testing” application.
This symbol indicates the “continuity testing” application. The buzzer
provides an audible signal.
This symbol marks the range “capacity testing”.
(DC)-voltage or current.
(AC)-voltage or current.
Earth (voltage to earth).
