background image

Pevex Stoves - Brightwell 400P 

– Installation & Operating Manual

 

Brightwell 400P 

– 

July 2022 v1 

 

 

 

 

 
e) The Warranty does not cover damage caused by over-firing of the appliance. (Please see your Installation 
and Operating Instructions for further information) 
 
f) The entire flue system 
 
g) Misuse of the stove including water/liquid/heat damage 
 
h) Damage caused by unauthorised modifications, use or repair. 
 
i) Damage or defects caused by the product being stored in a damp, unheated environment. 
 
j) Consequential loss (to the extent permitted by law) relating to other associated products that have not been 
supplied by Pevex Stoves. 
 
k) Consequential loss (to the extent permitted by law) related to decorations, furnishings or other household 
assets. 
 
l) Delivery to/or return transport costs. Removal and re-installation costs, or any labour cost to fit parts 
 
Repaired  or  replaced  products  are  covered  only  for  the  remainder  of  the  original  warranty  period. 
If you should ever wish to make a warranty claim because of a product fault or defect, you must inform your retailer 
within a reasonable amount of time, this is within 14 days from the date on which the fault or defect first became 
apparent. If the product fault or defect is notified after 14 days from the date on which the fault or defect became 
apparent, Pevex Stoves cannot accept any liability for events or issues which arise after the 14 day period or which 
are  caused  or  increased  by  the  lack  of  notification  which  therefore  prevented  action  being  taken  to  restrict  or 
eliminate any consequences arising from the fault or defect at an earlier date. 

 

In  the  event  of  a  product  fault  occurring  during  the  warranty  period,  Pevex  Stoves  will  send  the  appropriate 
component or goods necessary to rectify the fault, free of charge, but does not cover any labour cost to fit them. 

 

Nothing in the Warranty shall make Pevex Stoves liable for any or special, incidental or consequential damages, 
injury to persons or property, or any other 

consequential loss beyond the consumer’s statutory rights. The liability 

on these issues is covered by Pevex Stoves Terms and Conditions of Sale. 

 

Pevex 

Stoves’ total liability extends only to the purchase price paid for the goods by the Premium Retailer,  

 

The Pevex Stoves Warranty does not affect your statutory rights. 

 

The above warranty terms and conditions came into effect on 1st January 2013 and are applicable for all 
relevant products purchased after this date. 

 

Please note: 

This warranty is applicable for purchases within the United Kingdom and the Republic of Ireland 

 

 

 

Page 26 of 28 

APPROVED SMOKELESS FUELS (SOLID MINERAL FUELS) ONLY TO BE USED ON THIS STOVE 

 

Only the following smokeless fuels may be used in this stove, Ancit, Anthracite Large Nuts, Centurion, 
Extracite, Homefire, Maxibrite & Phurnacite 

 

Only smokeless fuels may be burnt in SMOKE CONTROL AREAS.  

 

PETROLEUM COKE AND HOUSE COAL ARE NOT SUITABLE OR USE ON THIS APPLIANCE, IF 
USED WILL VOID YOUR WARRANTY - USE OF PETROLEUM COKE, LIQUID FUELS, HOUSE COAL 
AND UNAUTHORISED FUELS WILL INVALIDATE THE GUARANTEE AND MUST NOT BE USED, 
THESE INCLUDE EXCEL, TAYBRIGHT & BRAZIERAS

 

this will cause the stove to “over fire” as well as 

damaging the internal components.  Operating at temperatures in excess of 500ºC will cause irreparable 
damage which is not covered by the guarantee.  

Burning any “contaminated” or treated wood which may 

have been painted, varnished, oiled/stained or materials such as MDF or plywood which contain 
resins/glues should never be used as this will cause an over-fire situation resulting in damage to the glass 
and bricks not to mention the toxic gases emitted into the atmosphere.  Also, never burn 
bituminous house coal which is designed for open fires and not for use in stoves as this fuel is very 
volatile and gaseous containing lots of sulphur which will 

permanently etch marks in the glass 

as well 

as potential damage to the bricks, baffles and grate 

Summary of Contents for BRIGHTWELL 400 P






























Reviews: