STEERING / FORK
41
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
Removal of the fork
- Remove the rear shield panel. See:
Procedure 5. page 23.
- Remove the handlebars from the fork tube.
(1 screws and 1 nut) (1).
When re-installing, use a new nut.
Tightening torque: 40 Nm.
- Suspend or immobilize the machine
securely.
- Remove the front brake caliper from the fork
tube.
Tightening torque: 45 Nm.
- Remove the front wheel.
Tightening torque: 65 Nm.
When re-installing, use a new nut.
- Remove the front mudguard.
- Remove the brake control cable grommet
and the speed sensor located under the fork
triple clamp (2) (2 screw).
- Using tool P/N 757860 remove the steering
locknut.
- Remove:
• The lock washer.
• The nut.
• the rubber washer.
• The nut.
• The dust cover.
• The upper cone.
- Remove the fork.
- Remove the caged ball bearings.
1
N
2
N
757860
Summary of Contents for Speedfight3 LC
Page 1: ...Direction commerciale Animation technique réseau WORKSHOP MANUAL ...
Page 58: ......
Page 59: ......