ELMANANG.DOC
5/24/2003
19
Coded anti-start
Your scooter is equipped with a coded anti-start system. This system prevents starting if the confidential
code is not keyed into the key pad first.
When your scooter is delivered, the anti-start system is activated under the code number "1111".
As the code number "1111" used for delivery is not confidential, we recommend that you change it as
soon as possible by following the procedure described below:
CHANGING THE ANTI-START CODE
−
Switch on the vehicle
−
Press the "V" button until you hear two beeps
−
Key in the activated code
(for the first time of changing 1111)
−
Key in the code of your choice
(4 figures imperative)
−
Key in this code a second time.
The new code
(which is now confidential)
is memorised. You must use this code to start your Scoot'elec
after each time you have turned off.
General comment
−
A beep each time you key in a number tells you that the figure has been memorised.
−
A short series of beeps tells you that an operation is valid.
−
A long series of beeps tells you that the code is wrong or that the interval between keying in two figures
was too long. In this case, you must restart the operation.
−
If the code was wrong, wait 10 seconds and then restart the operation.
CHANGING THE CODE
Former active code
New code to be keyed in twice
ON
V
1 1 1 1
5 4 3 2
5 4 3 2
"Beep"
"Beep" "Beep" "Beep"
"Beep"
"Beep" "Beep" "Beep"
"Beep"
"Beep" "Beep" "Beep"
"Beep
"Beep"
"Beep"
"Beep"
"Beep"
"Beep"
"Beep"
"Beep"
Operation confirmed
