ELMANANG.DOC
5/24/2003
15
Operating instructions
Placing on stand
The stand is equipped with levers which facilitates this operation.
−
Stand by the side of your scooter.
−
Make sure the vehicle is in a vertical position by holding the handlebars and the handle located behind
the seat.
−
With your foot, press down on the stand lever whilst gently pulling the vehicle to the rear by the
handlebars and the seat handle.
Warning
Once on its stand, make sure that the vehicle is stable so as to avoid any risk of its falling over which
might cause bodily harm or
damage
to the scooter.
Kill switch
−
Pressing this button
(8 page 10)
stops the motor and prevents the vehicle starting
(the warning lights
start to flash).
In order to use the vehicle again, it is necessary to :
−
moving the switch the button back to its original position.
−
switch off using the key and back on again after 2 seconds.
−
check that the accelerator handle is at rest.
−
key in the confidential code.
Steering anti-theft protection
To lock the steering :
turn the handlebars fully to the left, push whilst turning the key to the position.
The key can be withdrawn.
Putting the key in the garage position enables the vehicle to be moved.
The key can not be withdrawn.
Housing for demi-jet helmet
Opening :
unlock and turn the steering to the right.
Press button
A
and tilt the cover forwards.
