background image

ELMANANG.DOC  

5/24/2003

 

 

16 

 

                             

Seat 

 

Opening :

 

 
Put the start key into the lock at the rear left hand side, turn it a quarter turn towards the rear and raise the 
seat. 
 

Closing:

 

 
press down on the rear part of the seat: the key is not necessary. 
 

The seat storage compartment gives access to : 

 

the battery charging lead, 

 

the extra charging plug

 (option),

 

 

the maintenance equipment 

(reserved for PEUGEOT MOTOCYCLES dealers),

 

 

the housing of the U type anti-theft device. 

Lighting and indicators 

 
Correct functioning of the lighting and indicating equipment constitutes an essential safety factor. 
 
Before setting off and while driving the scooter, the driver must make sure that the various lights carry out 
the function for which they are intended properly. 
 
 

Light specifications

 

Driving light / dipped headlights 

15W P26S 

Parking light 

N/A 

Stop and rear light 

21/5W  BAY 15D 

Indicators 

10W BA 15S 

Speedometer light 

1.2W T5 

(without cap

)

 

Tell tales 

   2W T5

 

(without cap)

 

All bulbs are 12 volts

 

 
In case any of the lights do not function correctly, get in touch with a PEUGEOT MOTOCYCLES 
distributor. 
 

Changing bulbs

 

 

At the front : 

Headlight

 

 

 

remove the 4 side screws 

 

 

remove the upper screw 

 

 

 

tilt the whole hea casing assembly 

 

 

change the bulb 

 

Summary of Contents for Scoot'elec






















Reviews: