PEUGEOT Satelis, Service Manual

Page: 24 / 83

24
Replacing the filter
Warning
- Do not dispose of the oil in the environment.
Carry out the disposal of the oil, the gasket and
the filter in accordance with the law.
Warning - To avoid burns, take care not to touch hot engine parts.
- Remove the silencer.
- Remove filler plug «
A
».
- Remove and clean the drain plug gauze strainer with
compressed air.
- Using a strap wrench for filters, remove cartridge filter «
C ».
- Ensure that the O-rings on the prefilter and the drain
plug are in good condition.
- Lubricate the O-rings and then refit the gauze strainer
and the oil drain plug. Tighten the drain plug with the
prescribed torque.
- Fit a new cartridge filter after lubricating the O-ring.
Turn in until the gasket makes contact and then screw
it with the prescribed torque.
- Reinstall the silencer.
- Add engine oil as previously described.
Tightening torque: Oil filter: 12 - 16 N·m
Recommended oil: Selenia HI Scooter 4 Tech
------------------------------------------------------------------------------------------------------------------------------------------------------------
Checking the hub oil level
Put the vehicle on the central stand on level ground.
- Unscrew oil dipstick «
A », wipe it with a clean cloth,reinsert it and then screw it in fully .
- Pull out the dipstick again and check that the oil level is between the MIN and MAX marks (see figure); if
the level is below the MIN mark, top up with oil.
- Reinsert the dipstick and screw it tight.
MAX
----------------------------------------------------------------------------------------------------------------------------------------------
Renewing the hub oil
- Remove oil filler plug « A ».
- Unscrew oil drain plug « B » and drain all the oil.
- Retighten the oil drain plug and then fill the hub with
fresh oil.