PEUGEOT PARTNER 2016, Handbook, Page: 85 / 260

83
EASE OF US
E and
COMFORT
4
Partner-2-VU_en_Chap04_Ergonomie_ed02-2016
Practical information
Returning to the seat position
- In a single movement: take hold of
the red strap and pull the assembly
horizontally towards the rear.
Guide the movement until the feet
of the bench seat lock on the floor.
- Raise the seat backrest.
The control A locks in place
automatically.
- Check that the bench is locked on
the floor correctly once it has been
returned to the seat position.
Do not let the assembly fall sharply.
Good practice
There is no need to assist, guide or
support the tilting movement using
your free arm.
The rear seat belt casings are not
designed for securing the load
transported. Use the stowing rings on
the floor only.
The bench seat of the crew cab is not
suitable for the installation of a child
seat.
- Using the same hand, fold the seat
backrest and the associated grille
onto the seat cushion.
- Take hold of the red strap (like
a handle) and lift the assembly
vertically, guiding the movement to
the fully folded position.
The raised seat rests against the
backrests of the seats of row 1.
Head restraints and seat
belts
The three seats are equipped with
inertia reel seat belts. The seat belts
of the outer seats are secured to the
body, whereas the seat belt of the
centre seat is secured to the backrest
of the bench seat.
Each seat has a head restraint bolted
onto the load retaining grille and which
can be removed.
Do not store a head restraint inside
the vehicle unless it is properly
stowed or fixed to a support.
Do not drive with rear passengers
without first bolting the head restraints
in place.