PEUGEOT PARTNER 2016, Handbook, Page: 35 / 260

33
READY
T
O GO
3
Partner-2-VU_en_Chap03_Pret-a-partir_ed02-2016
Instruments and controls
Warning lamp is indicates Solution - action
Coolant
temperature
and level
on with needle
in the red
zone.
an abnormal increase in
temperature. Park and switch off the ignition then allow to cool.
Visually check the level.
flashing.
a drop in the coolant level.
Chapter 7, "Levels" section.
Contact a PEUGEOT dealer or a qualified
workshop.
Service
on temporarily. minor faults or warnings.
Consult the alert log in the display or screen.
If your vehicle is equipped with a trip computer or
a screen: refer to the "Steering mounted controls"
section in Chapter 4. Contact a PEUGEOT dealer
or a qualified workshop. remaining on. major faults.
Seat belt not
fastened
on then
flashing.
the driver and/or front
passenger has not fastened
their seat belt.
Pull the strap then insert the tongue in the buckle.
accompanied
by an audible
signal then
remains on. the vehicle is moving with
the driver's and/or front
passenger's seat belt not
fastened.
Check that the seat belt is fastened by pulling the
strap.
Chapter 5, "Seat belts" section.
ECO
on.
The Stop & Start system
has put the engine in STOP
mode following a vehicle
stop (red light, traffic jam,
etc...).
As soon as you want to move off, the warning
lamp goes off and the engine restarts
automatically in START mode.
flashes for a
few seconds,
then goes off.
STOP mode is temporarily
unavailable.
or
START mode has been
invoked automatically.
Chapter 3, "Stop & Start" section.