PEUGEOT PARTNER 2016, Handbook, Page: 149 / 260

147
QUICK HELP
8
Partner-2-VU_en_Chap08_Aide-rapide_ed02-2016
Changing a wheel
5. Fitting the spare wheel
- Position the wheel on the hub and
start tightening the bolts by hand.
- Carry out an initial tightening of the
bolts using the wheelbrace.
- Lower the vehicle completely by
folding the jack, then remove the
jack.
- Tighten the bolts again using the
wheelbrace, tighten them fully
without forcing them.
- Place the wheel to be repaired in
the carrier.
The spare wheel is not designed
to be used over long distances.
Have the tightening of the bolts
and the tyre pressure checked by
a PEUGEOT dealer or a qualified
workshop as soon as possible.
Have the original wheel repaired
and refitted by a PEUGEOT dealer
or a qualified workshop as soon as
possible.
- Secure the carrier on the hook then
raise the carrier by tightening the
bolt with the wheelbrace.
- Fully tighten the bolt, then check
that the wheel is held flat against
the floor.
If this is not the case, repeat the
operation.
Never go underneath a vehicle
that is supported only by a jack
(use a stand).
Never use a power driver in place of
the wheelbrace.