25
Access
2
With Keyless Entry and Starting
Following disconnection of the vehicle battery,
replacement of the remote control battery or in
the event of a remote control malfunction, you
can no longer unlock, lock or locate your vehicle.
► Place the mechanical key (integral with the
remote control) in the lock to unlock your vehicle.
► Remove the carpet underneath the 12 V
socket.
► Place the electronic key in the house
provided for this purpose.
► Switch on the ignition by pressing "START/
STOP".
The electronic key is now fully operational again.
If the problem persists, contact a PEUGEOT
dealer or a qualified workshop as soon as
possible.
Doors
Opening
From outside
► After unlocking the vehicle using the remote
control or the key, pull the door handle.
From inside
► Pull the interior control lever of a front door;
this unlocks the vehicle completely.
The interior opening control on a rear
door does not work if the child lock is on.
For more information on the
Child Lock
, refer
to the corresponding section.
Closing
If a door or the boot is not closed properly
with the engine running or the vehicle
moving (speed above 6 mph (10 km/h)), a
message appears for a few seconds.
Boot
Opening
► With the vehicle unlocked or with the
Keyless Entry and Starting electronic key in
the recognition zone, press the central tailgate
control.
► Lift the tailgate.
For more information on the
Remote control
or
on the
Keyless Entry and Starting
, please refer
to the corresponding section.
If there is a fault or you have difficulty
moving the tailgate when opening or
closing it, have it checked as soon as
possible by a PEUGEOT dealer or a qualified
workshop to prevent the problem becoming
worse, and potentially causing the tailgate to
drop and thereby inflicting serious injuries.
Closing
► Lower the tailgate using one of the interior
grab handles.
If the tailgate is not closed correctly (the lock
has two notches): with the
engine running
or
