![PEUGEOT 308 2020 Handbook Download Page 10](http://html1.mh-extra.com/html/peugeot/308-2020/308-2020_handbook_1533730010.webp)
8
Instruments
If a warning lamp remains lit
The references
(1)
,
(2)
and
(3)
in the warning
and indicator lamp description indicate whether
you should contact a qualified professional in
addition to the immediate recommended actions.
(1)
:
You must stop the vehicle
.
Stop as soon as it is safe to do so and switch off
the ignition.
(2)
: Contact a PEUGEOT dealer or a qualified
workshop.
(3)
: Visit a PEUGEOT dealer or a qualified
workshop.
List of warning and
indicator lamps
Red warning/indicator lamps
STOP
Fixed, associated with another warning
lamp, accompanied by the display of a
message and an audible signal.
A serious fault with the engine, braking system,
power steering, automatic gearbox or a major
electrical fault has been detected.
Carry out (1) and then (2).
Engine oil pressure
Fixed.
There is a fault with the engine lubrication
system.
Carry out (1) and then (2).
► Press this button to display and scroll through
the various display modes on the instrument
panel.
The selected display mode is automatically
applied after a few moments.
Display modes
– "
DIALS
": standard display of analogue and
digital speedometers, total distance recorder
and:
• fuel gauge, coolant temperature indicator
and rev counter (Petrol or Diesel).
–
NAVIGATION
": specific display, showing
current navigation information (map and
instructions).
– "
DRIVING
": specific display, showing
information relating to active driving aid systems.
– "
MINIMAL
": display with digital speedometer,
distance recorders, fuel gauge and coolant
temperature indicator.
– "
PERSONAL 1
"/"
PERSONAL 2
": displays the
information selected by the driver in the centre of
the instrument panel.
Configuring a "PERSONAL" display mode
With PEUGEOT Connect Radio
► Press
Settings
in the banner of the
touch screen.
► Select "
Configuration
".
► Select "
Instrument panel
personalisation
".
With PEUGEOT Connect Nav
► Press
Settings
in the banner of the
touch screen.
► Select "
OPTIONS
".
► Select "
Instrument panel
personalisation
".
► Select "
PERSONAL 1
" or "
PERSONAL 2
".
► Select the type of information using the scroll
arrows on the touch screen:
• "
Default
" (empty).
• "
Trip computer
".
• "
Media
".
• "
G-metres
" (depending on version).
• "
Power Boost + Torque
"
(depending on version).
► Confirm to save and exit.
The information is displayed immediately on the
instrument panel if the corresponding display
mode is selected.
The type of information selected in
"
PERSONAL 1
" mode is not available in
"
PERSONAL 2
" mode.
Warning and indicator
lamps
Displayed as symbols, the warning and indicator
lamps inform the driver of the occurrence of a
malfunction (warning lamps) or of the operating
status of a system (operation or deactivation
indicator lamps). Certain lamps light up in two
ways (fixed or flashing) and/or in several colours.
Associated warnings
The illumination of a lamp may be accompanied
by an audible signal and/or a message displayed
in a screen.
Relating the type of alert to the operating status
of the vehicle allows you to determine whether
the situation is normal or whether a fault has
occurred: refer to the description of each lamp
for further information.
When the ignition is switched on
Certain red or orange warning lamps come on
for a few seconds when the ignition is switched
on. These warning lamps should go off as soon
as the engine is started.
For more information on a system or a function,
refer to the corresponding section.
Warning lamp continuously
lit
The illumination of a red or orange warning lamp
indicates the occurrence of a fault that needs
further investigation.