9
i
PRACTICAL INFORMATION
150
TOWING THE VEHICLE
Procedure for having your vehicle
towed or for towing another vehicle us-
ing a removable towing eye.
Access to the tools
Towing your vehicle
On the front bumper, pull on the cov-
er to unclip it.
Screw the towing eye in fully.
Install the towing arm.
Switch on the hazard warning lamps
on the towed vehicle.
On the rear bumper, unclip the cover
by pressing at the bottom.
Screw the towing eye in fully.
Install the towing arm.
Switch on the hazard warning lamps
on the towed vehicle.
Towing another vehicle
The towing eye is installed in a holder at
the bottom of the boot under the fl oor.
For access to it:
place the vehicle in "coupé" confi gu-
ration,
open the boot,
raise the fl oor,
remove the towing eye from the
holder.
Place the gear lever in neutral
(position
N
on the automatic
gearbox).
Failure to observe this specifi c
instruction may result in dam-
age to certain braking units and
the absence of braking assis-
tance when the engine is re-
started.
Summary of Contents for 207 CC
