PEUGEOT 207 CC, Handbook

Page: 31 / 232

1
i
i
MONITORING
29
Following this operation, if you wish
to disconnect the battery, lock the
vehicle and wait at least fi ve minutes
for the zero reset to be taken into
account.
Service indicator zero reset
After each service, the service indicator
must be reset to zero.
The procedure for resetting to zero is as
follows:

switch off the ignition,

press and hold the trip distance re-
corder zero reset button,

switch on the ignition; the distance
recorder display begins a count-
down,

when the display indicates "=0" , re-
lease the button; the spanner disap-
pears.
The distance remaining may be
weighted by the time factor, de-
pending on the type of driving done.
Therefore, the spanner may also
come on if you have exceeded the
period since the last service, as in-
dicated in the warranty and mainte-
nance record.
Service overdue
For a few seconds after the ignition is
switched on, the spanner fl ashes to in-
dicate that the service must be carried
out as soon as possible.
Example: the service is overdue by
300 km (300 miles).
For a few seconds after the ignition
is switched on, the display indicates
-300 km or -300 miles:
A few seconds after the ignition is switched
on, the distance recorder resumes its nor-
mal operation. The spanner remains on .