PetSpy M686 User Manual Download Page 4

 

FEATURES

1. 4 Training Modes: Continuous and Convulsive Shock, Vibration, and Tone.

2. Rechargeable Transmitter and Receiver - recharge time is about 2-3 hours.

3. Fully waterproof Receiver Collar.

4. The system communication range is up to 1100 yards (in ideal conditions).

5. Eight correction levels of Shock and Vibration Stimulation.

6. The system can be used with 1 or 2 collars. It gives you a simultaneous control of up 

to 2 dogs.

7. Power Saving Design with auto sleep mode and remote collar activation.

8. Two pairs of metal contacts (short and long) for dogs with different hair length.

9. Two pairs of conductive rubber caps for added safety. They were specifically designed 

to avoid skin irritation and injuries.
 

HOW DOES PETSPY DOG TRAINING SYSTEM WORK?

PetSpy Dog Training System can assist you with controlling and training your dog 

without a leash in the range up to 1100 yards. Using a Remote Transmitter you can send 

a signal to the collar in form of Shock, Vibration, or Tone. By using PetSpy Dog Train-

ing System consistently, you can train your dog to eliminate any undesired behavior 

(jumping up, digging, chasing, etc.) and teach your dog understand many obedience 

commands (sit, come, stay, etc).
 

IMPORTANT NOTES

•The Remote System range goes up to 1100 yards. Hold the Transmitter horizontally 

and away from your body to achieve maximum range. Weather condition, terrain, 

vegetation, and interference from other electronic devices can affect the maximum 

communication distance of the system.  

•There are 8 levels of Shock and Vibration Simulation. If you use the strongest level 

there is a chance that it can penetrate dog’s fur up to 6mm thick. Do not shave your 

Dog’s neck to reduce the risk of skin irritation.

•For comfort, safety, and effectiveness of the system, please start training your pet with 

the lowest level of Shock. It’s fine to have a Vibration level on medium or high. Please 

check your dog’s neck after each training session for skin irritation. If skin irritation de-

velops, discontinue to use the collar for 48 hours. If condition persist beyond 48 hours, 

please consult your veterinarian.

•Do not attach a leash to the collar. Use a separate collar if there is a need for a leash.

•We suggest you to use the Vibration Stimulation first before starting to use the Shock 

Stimulation. Then slowly start with the lowest level of the Shock Stimulation. If you 

follow this training method, your dog will learn that the Shock Stimulation will come 

after Vibration. Hence, the Vibration alone can effectively cure unwanted behavior of 

your dog without a need for the Shock.

Summary of Contents for M686













Reviews: