Petsafe Stay & Play PIF00-13663 Product Manual Download Page 19

petsafe.com

19

Important Recycling Advice

Please respect the Waste Electrical and Electronic Equipment regulations in your country. This equipment must be recycled. At the end of 
the product life, do not place it in the normal municipal waste system. Please check the regulations in your area or return it to where it was 
purchased so that it can be placed in our recycling system. If these options are not possible, please contact the Customer Care Center for 
further information. 

Warranty

One Year Non-Transferrable Limited Warranty

This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can 
be found at www.petsafe.com and/or are available by contacting your local Customer Care Center.

United States and Canada

—Radio Systems Corporation, 10427 PetSafe Way, Knoxville, TN 37932 USA

Australia/New Zealand

—In compliance with the Australian Consumer Law, Warranties Against Defects, effective January 1, 2012, 

warranty details of this Product are as follows:

One Year Non-Transferrable Limited Warranty

What is covered: Radio Systems Australia Pty Ltd. (hereinafter referred to as “Radio Systems”) warrants to the original retail purchaser, and 
not any other purchaser or subsequent owner, that its product, when subject to normal and proper residential use, will be free from defects in 
material or workmanship for a period of one (1) year from the purchase date. An “original retail consumer purchaser” is a person or entity who 
originally purchases the Product, or a gift recipient of a new product that is unopened and in its original packaging. When serviced by Radio 
Systems Customer Service, Radio Systems covers labour and parts for the first year of ownership; after the first year, a service or upgrade 
charge will apply relative to replacement of the product with new or refurbished items at Radio Systems’ sole discretion.
The limited warranty is non-transferrable and shall automatically terminate if the original retail consumer purchaser resells the Radio Systems 
product or transfers the property on which the Radio Systems product is installed. This Limited Warranty excludes accidental damage due to 
dog chews; lightning damage; or neglect, alteration, and misuse. Consumers who purchase products outside of Australia, New Zealand, or 
from an unauthorised dealer will need to return the Product to the original place of purchase for any warranty issues.
Please note that Radio Systems does not provide refunds, replacements, or upgrades for change of mind, or for any other reason outside of 
these Warranty terms.
Claims Procedure: Any claim made under this Warranty should be made directly to Radio Systems Australia Pty Ltd. Customer Care Centre at:

Radio Systems Australia Pty Ltd. 
PO Box 7266, Gold Coast Mail Centre QLD 9726, Australia 
Australia Residents: 1800 786 608 
New Zealand Residents: 0800 543 054 
Email: [email protected]

To file a claim, a proof of purchase must be provided. Without a proof of purchase, Radio Systems will not repair or replace faulty components. 
Radio Systems requests the Consumer to contact the Radio Systems Customer Care Centre to obtain a Warranty Return number, prior to 
sending the Product. Failure to do so may delay in the repair or replacement of the Product.
If the Product is deemed to be faulty within 30 days from date of original purchase, Radio Systems will organise for a replacement to be sent in 
advance of returning the faulty Product. A Post Bag will be included with the replacement Product for the return of the faulty Product. The Product 
must be returned within 7 days of receiving the replacement. If the Product is deemed to be faulty after 30 days from the date of original 
purchase, the consumer will be required to return the Product to Radio Systems at the consumer’s own expense. Radio Systems will test and 
replace the faulty unit or its components and return to the consumer free of charge, provided the Product is within its said warranty period. This 
warranty is in addition to other rights and remedies available to you under the law. Radio Systems goods come with guarantees that cannot be 
excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable 
quality and the failure does not amount to a major failure.
Should you have any queries or require any further information, please contact our Customer Care Centre on 1800 786 608 (Australia) or 
0800 543 054 (New Zealand).

Summary of Contents for Stay & Play PIF00-13663





















Reviews: