9
petsafe.com
7. Rinse and thoroughly dry all parts before reassembling the unit. If needed, carefully clean the conveyor using only a damp cloth or sponge.
Do not submerge or expose the electrical components to water or cleaning solutions. DO NOT submerge or expose the
base unit, conveyor or any electrical components to water or cleaning solutions. DO NOT use bleach or chemicals to clean
as they can act as a repellent to your cat.
Always unplug the unit when not in use, before putting on or taking off parts and before cleaning.
Reassembly
1. Replace the litter bowl with litter guard on the base unit.
2. Follow steps 5 - 9 in the “Start Here” section (pages 6 – 7).
Note:
The conveyor cover and waste bin must be aligned correctly and fully inserted in the unit to turn on the green indicator light. The green light
must be on for the litter box to operate properly. If the light is blinking blue, then either the waste bin or conveyor cover are not in place.
Only use premium clumping, clay cat litter. Using a different type can cause the litter box to malfunction. Maintain the litter level at
the fill line or the litter box may not operate properly.
5
5. Lift up the litter bowl to remove it, and dispose of the used litter.
6
6. If further cleaning is needed, remove the litter guard. The litter bowl,
litter guard and waste bin can be submerged in water and washed
with mild soap.
