background image

 11

petsafe.com

TROUBLESHOOTING

LED Indicator

LIGHT COLOR AND FUNCTION

WHAT IT MEANS

Solid Green

The unit is fully operational.

Blinking Blue

The waste trap or conveyor cover are not fully in place.

Solid Red

There is an issue with the conveyor motor. Unplug the unit and plug it back in. If the 
light turns red again after 10 minutes, please call our Customer Care Center at +1 
(800) 732-2677.

Blinking Red

There is an issue with the bowl motor. Unplug the unit and plug it back in. If the 
light blinks red again after 10 minutes, please call our Customer Care Center at 
+1 (800) 732-2677.

Alternating Red and Blue

There is an issue with both the conveyor and bowl motors. Please unplug the unit, 
and call our Customer Care Center at +1 (800) 732-2677.

PROBLEM

SOLUTION

Waste is breaking into small pieces and falling 

through the spaces in conveyor

• Make sure you are only using clumping, scoopable, clay cat litter.
• Make sure to keep bowl filled at or below the maximum litter level fill line for 

best results. Occasional manual scooping may be needed.

Litter is gathering at base of conveyor or behind 

conveyor

• The bowl may be filled with too much litter. Make sure the bowl is not filled 

above the maximum litter level fill line. Use a scoop to redistribute litter or 
remove excess litter from the bowl.

• Make sure the waste guide is in the lowered position to help move waste up 

the conveyor.

Unit makes a grinding noise when bowl rotates

The unit may need cleaning (see “Cleaning” section). Make sure there is no stray 
litter between the litter bowl and the base of the litter box.

Conveyor is not moving waste into waste bin or 

is running backwards

• Test the bowl to make sure it is rotating (see “Testing the Litter Box” section). 
• Unplug the power adaptor from the wall and disconnect from the litter box. 

Wait 20 seconds, then securely reconnect the power adaptor and plug into a 
standard wall outlet. If the problem continues, call our Customer Care Center 
at +1 (800) 732-2677. 

Motor seems to be overheating, clicking or 

making unusual sounds

Unplug the unit and call our Customer Care Center at +1 (800) 732-2677. 

Green indicator light is not on or the unit is not 

receiving power

• Make sure adaptor is securely connected to unit and plugged into a standard 

wall outlet.

• Make sure the litter guard is installed under conveyor and the conveyor cover 

and waste bin are installed correctly. There are safety features that require 
these pieces to be installed properly for the unit to operate (see “Start Here” 
section).

Summary of Contents for Simply Clean













Reviews: