5
petsafe.com
Start Here
Note:
The litter guard and conveyor cover must be installed correctly for the unit to operate properly. If not installed correctly, the litter guard can
lift up the conveyor cover and cause a power outage. Safety features require that these pieces are installed correctly so the moving conveyor is
not exposed.
1
1. Remove the Simply Clean
®
and components from packaging. Place
the litter box on a firm, flat surface. Attach the bowl base with the
bowl (litter guard attached) on it to the conveyor base by lowering
the bowl base onto the open end of the conveyor base.
2
2. Press down firmly on the bowl base to ensure that it is snapped
into place.
3
3. Next, install the conveyor by sliding the long post at the top (
A
) into
the hole on the conveyor base. Then insert the short post (
B
) on the
opposite side into the hole in the base by pressing it down into the
hole with the flange pointing down.
4
4. Leave the conveyor in the upright position, and plug in the motor.
The motor plug is at the end of the red wire, and it clips into the
conveyor base.
