16
Customer Care Center 1-800-732-2677
3. If your pet sits reliably on receiving
the Tone B and the spoken “Sit”
command, then training is complete.
Release your pet from the “Sit” position
and praise him. If not, move on to step 4.
4. Hold the leash and Handheld Remote
in one hand. Press and hold both the
Tone B and Stimulation Buttons while
saying “Sit” and if necessary using your
free hand to guide your pet into the “Sit”
position. Release the buttons immediately when your pet sits. Repeat this several times.
5. If your pet now sits reliably with the spoken “Sit” command, he may now be ready to respond
without stimulation. Take a play break and then go back and repeat from step 2 with Tone B only.
Note: Keep your pet close to you while teaching the “Sit” command.
The “Recall” Command
1. Put a separate, non-metallic collar on your pet’s neck
ABOVE the Receiver Collar, and attach a long leash.
Note: Be sure the extra collar does not put pressure on
the Contact Points.
2. Hold your leash in one hand and the Handheld
Remote in the other.
3. Wait for your pet to walk away from you.
4. Press and hold the Tone B Button while saying “Recall
or Come” and if necessary, use the leash to guide your
pet toward you.
5. Immediately release the Tone B Button as soon as your
pet steps toward you, and praise him enthusiastically.
6. Quickly move backwards as your pet begins to walk
toward you, praising him the entire time. Stop moving
backwards and praise your pet when he returns to
you.
7. Repeat steps 3 to 6 several times.
8. If your pet comes to you reliably on receiving the spoken
“Recall” command, then training is complete. Release
your pet and praise him. If not, move on to Step 9.
9. Wait for your pet to walk away from you.
10. Using the Recognition Level for your pet, press and hold both the Tone B and Stimulation
Buttons while saying “Recall” and if necessary use the leash to guide your pet toward you.
