26 1-800-732-2677
Day 1 - Boundary Awareness
Tone Only Training Mode
Perform three sessions on day 1, each training session lasting 10-15 minutes.
Goal:
To have your pet learn that the Boundary Flags and warning beep from the Receiver Collar define the new Pet
Area.
Setup:
• Program the Static Correction Level on the Receiver Collar to Level 1 Tone Only training mode.
• Put a separate non-metallic collar on your pet’s neck ABOVE the Receiver Collar and attach a leash.
Be sure the extra collar does not put pressure on the Contact Points.
• Have tiny pieces of treats that your pet will find desirable available (hot dogs or lunch meat work well).
• Have your pet’s favorite play toy available.
Steps:
1. Begin by walking your pet on a leash in the Pet Area. Calmly praise and talk to your pet.
2. Move toward the Boundary Flags (
1A
). Keep your mood happy.
3. With full control of your pet on a leash, walk to the flags. As your pet enters the Static Correction Area, the
Receiver Collar will begin to beep (
1B
). Allow your pet to stay in the Static Correction Area for up to 2 seconds
then gently help him back into the Pet Area (
1C
). Immediately praise and offer your pet a treat as he enters the Pet
Area, even if you have helped with the leash.
4. Repeat this process at the same Boundary Flag until your pet resists going into the Static Correction Area.
5. Aim to master 3-4 Boundary Flags per session. Make this FUN! Praise if your pet quickly retreats or resists
going into the Boundary Zone.
1A
1B
1C
Days 2 thru 4 - Continue Boundary Awareness
Introduction to Static Correction
Perform three sessions per day, each lasting 10-15 minutes.
Goal:
To train your pet to stay in the Pet Area and respect the boundary.
Setup:
• Program the Static Correction Level on the Receiver Collar to Level 2.
• Put a separate non-metallic collar on your pet’s neck ABOVE the Receiver Collar and attach a leash.
Be sure the extra collar does not put pressure on the Contact Points.
• Have tiny pieces of treats available (hot dogs or lunch meat work well).
• Have your pet’s favorite play toy available.
Steps:
1. Repeat steps 1-5 in Phase One.
2. If your pet does not respond to the Static Correction, confirm that the Receiver Collar is fitting properly
according to Step 10 on page 23. Be sure the PetSafe
®
logo is upright facing toward your dog’s chin and
facing away from your dog’s body as shown in figure
10B
in page 23.
3. If the Receiver Collar is fitted properly and your pet does not respond to the Static Correction, increase the
Static Correction Level by 1. Watch for slight reactions at first such as ears up, head turned, looking at the
ground.
4. Stay at the same flag until your pet resists going into the Static Correction Area.
Phase
1
Phase
2
Summary of Contents for PAW POINT PIF00-13651
Page 2: ...2 1 800 732 2677 ...
