www.petsafe.net 15
Receiver Collar Status Indicators
The Receiver Collar uses colored LEDs and an Alarm Tone to indicate the functional and operational status
of the receiver. Refer to the table below to understand the operation of the lights and tones for the Receiver
Collar.
Receiver Collar Status Indicators
Status Light
Alarm Tone
Condition
While Charging
Solid red
No tone
Charge in progress
Solid green
No tone
Charge complete
No light
Charge failure, contact Customer Care Center
After Removing from Charger ReadyTest
®
Either red or green for 3 seconds
Off for 1 second
No tone
Unit is reporting battery charger status:
Red = battery charge is not complete
Green = battery charge is complete
Red/green for 3 seconds
OFF for 1 second
No tone
Unit is performing internal self test
Solid green or red/green or red
(5 second duration)
No tone
Battery charge indicator:
Green = 100%-60%
Red/green = 60%-20%
Red = 20% or less
Red flash occurring from 1 to 6 times
2 note chime immediately
after red flashing
Unit is reporting Static Correction level
from 1 to 6 then turns off
After Removing from BPU
No light
2 note chime
Unit is turned off
Operating Battery Status
Slow blinking green
(every 4-5 seconds)
No tone
Collar battery charge 100%-60%
Slow blinking red/green
(every 4-5 seconds)
No tone
Collar battery charge 60%-20%
Slow blinking red
(every 4-5 seconds)
No tone
Collar battery charge 20% or less, charge immediately
Receiver Activation Status
Fast pulsating green
(3 flashes per second)
Low frequency
warning tone
Receiver collar in Warning Zone area
Fast pulsating red
(3 flashes per second)
Mid frequency
warning tone
Anti-linger static correction being delivered with the
Receiver Collar in the Warning Zone area
Fast pulsating red
(3 flashes per second)
High frequency
warning tone
Run through static correction being delivered with the
Receiver Collar beyond the mapped boundary point area
Summary of Contents for PAW POINT PIF00-13651
Page 2: ...2 1 800 732 2677 ...
