6
+1 (800) 732-2677
How the System Works
A radio signal travels from the Fence Transmitter through a buried wire, marking the boundaries you wish to set for your
dog. Your dog wears a Receiver Collar that detects the signal at the boundary. As your dog approaches the boundary, the
receiver issues a warning tone. If he proceeds further, he receives a safe but startling Static Correction. While harmless, the
correction will persuade him to stay in the containment area you’ve established. Boundary flags are a temporary visual aid
for your pet; remove them after training. This PetSafe
®
In-Ground Fence
™
system has been proven safe, comfortable, and
effective for pets over 8 pounds.
Key Definitions
Fence Transmitter:
Transmits the radio signal through the Boundary Wire.
Pet Area:
Area within the Warning Zone where your pet can roam freely.
Warning Zone:
Outer edge of the Pet Area where your pet’s Receiver Collar begins to
beep, warning him not to go into the Static Correction Zone.
Static Correction Zone:
Zone beyond the Warning Zone where your pet’s Receiver
Collar will emit a Static Correction, signaling him to return to the Pet Area.
Boundary Width:
Combination of the Warning Zone and the Static Correction Zone.
Surge Protector:
Installed with the Fence Transmitter to protect it from lightning strikes
and power surges (USA and Canada only).
Receiver Collar:
Receives the radio signal from the Boundary Wire.
Correction Level Button:
Adjusts the level of Static Correction your pet receives
in the Static Correction Zone.
Receiver Indicator Light:
Indicates the level of correction at which the Receiver Collar
is set. This light also serves as a low battery indicator.
Contact Points:
Delivers the safe Static Correction when your pet moves into
the Static Correction Zone.
Power Jack:
Where the Power Adapter plugs into the Fence Transmitter.
Boundary Control Switch:
Switch located on the
Fence Transmitter to adjust according to the length of
Boundary Wire used.
Boundary Wire Terminals:
Where the Boundary
Wires connect to the Fence Transmitter in order to
complete a continuous loop.
Loop Indicator Light:
Indicates that the Boundary
Wire makes a complete loop, enabling the signal to be
transmitted.
Boundary Width Control:
Adjusts the width of
the Warning and Static Correction Zones.
Note:
Adjusting the knob does not change the level of Static
Correction on the Receiver Collar.
Correction Level Button
Battery
Contact Points
Receiver
LED
Indicator Light
Washers
Receiver Collar
Boundary Control Switch
Boundary Wire
Terminals
Loop Indicator Light
Power Light
Power
Jack
Boundary Width
Control
Fence Transmitter
Fence
Transmitter
Static
Correction
Zone
Warning
Zone
Static
Correction
Zone
Warning
Zone
Pet
Area
Boundary
Width
Surge
Protector
with Power
Adapter
Summary of Contents for In-Ground Fence ZIG00-14654
Page 31: ...petsafe com 31 Layout Grid ...